EasyManua.ls Logo

DK2 Power OPC566E - Troubleshooting

DK2 Power OPC566E
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8BACK TO MAIN MENU
CHECKLIST
1.
IS THE SAFETY BAR RESET? IS THE PALM BUTTON RESET?
2. Is the fuel shut-o valve on? SLIDE THE LEVER ALL THE WAY TO THE
RIGHT.
3. Are you using fresh, clean gas? If the gas is old, change it. Use a fuel
stabilizer if you keep gas longer than 30 days.
4. Is the spark plug clean? If the spark plug is dirty or cracked, change it.
If it’s oily, leave it out, hold a rag over the plug hole and pull the recoil cord
several times to blow out any oil in the cylinder, then wipe o the plug and
reinsert it.
PLEASE REFER TO THE KOHLER® COMMAND PRO ENGINE USER MANUAL
FOR ENGINE-SPECIFIC PROCEDURES.
TROUBLESHOOTING
MY OPC566E ENGINE WON’T START

Other manuals for DK2 Power OPC566E

Related product manuals