www.dkn-uk.com
11
. You can set age,
-
just the values.
Parameters Window default Range Note
User code U1 U1-U2
Age 25 10-99 Years old
Gender 1 1-2 1 for male, 2 for female
Weight 80 20-160 KG
Height 180 100-240 CM
Personalising The Units
To switch between metric and imperial measurements make sure the treadmill is in standby
mode, then press the PROG button once. Remove the safety key. You’ll hear the alarm and the
window will show “OFF”. Hold the PROG and MODE buttons until you see the following displays:
Safety Key
The treadmill has a safety key on the console and won’t work if the key is not in place. Attach
the key to both the console and yourself before starting to exercise. The console will display
“OFF” when the safety key is removed. For your safety, if the key is removed whilst the belt is
moving, it will stop quickly and a 3-beep alarm will sound. When the safety key is put back in
position, the console will display all functions for 2 seconds and then reset all data to zero.
When the window shows this display, the
measurement system has successfully
been switched from imperial to metric. Once
When the window shows this display, the
measurement system has successfully
been switched from metric to imperial. Once
To Next Page
Loading...