DLA ENGINE OPERATING-INSTRUCTION
MANUAL
04-21-21 Copyrighted Material
Owner’s Manual All Rights Reserved 03180-10000
Page - 11 DLA 32, 58, 64, 64-I2, 116, 116-I2 & 128cc, 180c, 232cc Rev. A.05.15
SPINNERS:
A sturdy, light weight spinner is best, but they tend to be rather expensive. GOLDEN SKIES R/C
AIRCRAFT, INC. offers lower cost spinners. Please refer to the GOLDEN SKIES R/C AIRCRAFT,
INC. website for spinner selections from two (2) inch to four (4) inch diameter.
www.goldenskiesrc.com/Product_page_Spinners.html
The prop-nut shown on the lower left is not required for DLA Engines; however, you will still
secure the spinner using the “Spinner-bolt” shown on the lower right. The tip of the engine’s
crankshaft is drilled and tapped for a 5.0 mm x 0.8 mm bolt. The length of the spinner-bolt will
depend upon the spinner size.
Spinner Bolts: GS R/C has a stock of spinner-bolts in various lengths. Visit the Golden
Skies R/C Aircraft website to purchase. www.goldenskiesrc.com
To Next Page
Loading...
