DMC cardo PACKTALK SKI - Getting Started with PACKTALK SKI; Getting to Know Your PACKTALK SKI; Charging the PACKTALK SKI; Switching Your Unit On;Off

2. GETTING STARTED
2.1 GETTING TO KNOW YOUR PACKTALK SKI
2.2 CHARGING THE PACKTALK SKI
Make sure that your PACKTALK SKI battery is charged for at least 4 hours before initial use.
To charge the unit:
1. Using the supplied USB cable, connect your computer or wall charger to the USBport on your PACKTALK
SKI.
● Charging with the wall charger is faster than via a computer USB port.
● Charging your unit switches it off automatically. To use your unit while it is being charged, switch it on.
(see Switching Your Unit On/Off on page 5).
While charging, the LED indicates the charging status as follows:
● Red LED on — charging
● Red LED off — charging complete
2.3 SWITCHING YOUR UNIT ON/OFF
To switch your PACKTALK SKIon:
● Press both and for 1 second.
The speaker plays an ascending tone and a voice message greets you.
The LED confirms your PACKTALK SKI is on:
5