714/715 Installation Guide | Digital Monitoring Products 5
COMPLIANCE INFORMATION
UL Commercial Burglary
To comply with ANSI/UL 365 Police‑Connected Burglary System or ANSI/UL 609 Local Burglary Alarm Systems, the
module and housing must be mounted in the UL listed enclosure with a tamper. The control panel enclosure may be
used.
UL Commercial Fire
For 715 2‑wire compatibility, refer to the panel guide. Any auxiliary power supply used must be regulated, power
limited and listed for Fire Protective Signaling.
Panel
XR150/XR550 Compatibility ID = A
XF6‑100/XF6‑500 Compatibility ID = A
ULC Commercial Burglary (XR Series Control Panels)
Place the zone expander module in a listed enclosure and connect a DMP Model 307 Clip‑on Tamper Switch to the
enclosure programmed as a 24‑hour zone.
The 714/715 zones can be installed in medium or high risk applications when two zones are used as shown in the Dual
Zone Protection diagram in the XR150/XR550 Canadian Installation Guide. Otherwise, 714/715 zones can only be used
in low risk applications.
ULC Residential Fire (XR Series Control Panels)
Refer to the appropriate panel compliance listing guide for the complete list of UL approved smoke detectors.
To Next Page
Loading...