DMTech BTi100 - Battery and Maintenance; General Usage; How to Charge the Battery; Storage

English
27
Battery and Maintenance
Lead-Acid Battery
The rechargeable lead-acid baeries in this speaker are the same
type of baeries as car baeries. How you use this baery has
signicant impact on its lifespan. With proper use and treatment, a
lead-acid baery can last for years. Here are some recommendaons
to maintain the baery and keep the baery lifespan as long as
possible.
General Usage
• Charge the baery completely before using it.
• Avoid draining the baery completely.
• For maximum life, drain the baery 80% once a month.
• Charge the baery completely aer each use.
• You may leave the unit plugged in for up to two weeks.
How to Charge the Battery
In order to charge the Bluetooth speaker baery, connect the power
port to a 220-240V power supply and turn the power switch to
“220-240V - CHARGE”. When the baery is fully recharged, charge
LED will turn o. When charging, the LED will be lit in RED. When the
baery is low, the LED will be blink in RED. When the baery is low,
you should charge the baery. Aer a few minutes of blinking the
baery will be depleted and it will turn o.
Storage
Avoid storing the speaker in high temperatures or moist places. For
long-term storage, periodically recharge the baery.
IMPORTANT!
> It is recommended that the baery is charged at least every
third month.