DMTech BTi80 - Connectivity Modes; Bluetooth Pairing and Operation; USB Playback; AUX Input Usage

17
English
6. Press 9 or : buons on the top panel or remote control to change to previous or
next song.
7. Press buon to pause the playback. Press again to resume playback.
Bluetooth:
When you have selected the Bluetooth input source, the display will show BT and the
power indicator ashes in blue. Start the Bluetooth funcon on your Bluetooth unit and
pair with the discovered Bluetooth unit BTi80. When the pairing has succeeded, the
power indicator illuminates in blue.
• How to pair your units depends on what mobile device you have. Check the user
manual for your mobile device for more instrucons.
• In some cases, you might need a password to pair your Bluetooth unit with the
tower speaker. If so, type in the password 0000.
• If you want to connect the speaker to another mobile device you must un-pair the
previously connected mobile device.
USB:
When you have selected the USB input source, the display will show USB. Connect
a USB unit to the USB port on the back of the tower speaker and the playback of the
les on the USB unit will start automacally.
• You can play audio les in MP3 format from a USB device. The speaker will skip
tracks that or not MP3 format.
• Depending on the amount of les and le size, it might take a few seconds for the
tower speaker to read the les on the USB unit, this is not a malfuncon.
AUX:
When you have selected the AUX input source, the display will show AUX. Connect
an audio cable between your audio unit and the Line In or RCA input on the back of
the tower speaker. Control the playback with your connected audio unit. If Line In
is connected at the same me as RCA, Line In will be priorized.