DMTech BTi80 - Troubleshooting and Specifications; Common Problems and Solutions; Technical Specifications

18
English
Troubleshooting
Problem Solution
The tower speaker is not power
supplied.
Check that the power cable is correctly
connected to the speaker and a wall outlet.
The remote control does not work. The baery in the remote control may be
empty and needs to be changed.
Aim the remote control towards the front
panel of the tower speaker.
No audio Check that the audio cable is correctly
connected to the speaker and your
device.
Check that the speaker is set to the
correct audio source.
Turn o and restart the speaker.
Speaker does not work. The electrical parts of the speaker
may have been short circuited and needs
to be repaired.
Specifications
Model BTi80
Power supply AC 220-240 V, 50 Hz
Output power Max 40 W (5 W x 2 + 10 W)
Power consumpon Max 40 W
Speaker 3” x 2
Subwoofer 4” x 1
Frequency response 40 Hz - 20 KHz
Signal/Noise ≥ 80 dB
AUX inputs Line In and RCA
USB charging current 5V, 500mA
Bluetooth version 2.1
Bluetooth prole EDR, A2DP
Bluetooth range 10 meter
Remote control range 7 meter
Remote control baery 2 x AAA
Dimensions 992 x 130 x 152 mm
Weight 4 kg