EasyManua.ls Logo

DNA Professional CM4-DSP - Power and Environmental Information; Power Connector; Power Switch; Disposal of Electrical Equipment

Default Icon
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24. Power connector.
It is used to connect the power supply to the mixer via an IEC cable.
25. Power switch.
Switch it to turn on/off the power.
Information about used electrical and electronic equipment
WARNING! THE DEVICE MUST NOT BE DISPOSED OF WITH HOUSEHOLD WASTE.
This symbol indicates that this product must not be disposed of with household waste, according to the EU
and your national law. In order to prevent potential damage to the environment or health, the used product
must be recycled. In accordance with current legislation, unusable electrical and electronic devices must be
collected separately at the designated facilities for recycling, acting on the basis of applicable environmental standards.
The main goal of European and national law regulations is to reduce the amount of waste produced from used electrical
and electronic equipment, to ensure an appropriate level of collection, recovery and recycling of used equipment, and
to increase public awareness of its harmfulness to the environment, at each stage of use of electrical and electronic
equipment. Therefore, it should be pointed out that households play a key role in contributing to reuse and recovery,
including recycling of used equipment. The user of electrical and electronic equipment intended for households
is obliged to return it to authorized collector after its use. However, it should be remembered that products classified
as electrical or electronic equipment should be disposed of at authorized collection points.