© 2015. DNP Imagingcomm America Corporation
All rights reserved. Rev: 01
HOW-TO SETUP TOSHIBA
®
FLASHAIR WIRELESS LAN
CARDS FOR PASSPORT CAMERAS AND THE DS-ID400
PRINTER
Overview
This document is intended to assist users in setting up the Toshiba® Flash Air Wireless LAN cards to be used with
the DNP DS-ID400 photo printer and various cameras including Sony® DSC-W710 Cyber-shot, Sony® DSC-H200
Digital Still Camera, Sony® DSC-H300 Digital Still Camera, Sony® DSC-W800 Digital Still Camera and Canon® G12
PowerShot.
Setting Up the Wireless LAN Cards
The wireless SD cards were shipped already set up and paired to the printer. However, setting them up again
ensures that they are set up correctly and paired with each other and the printer being used.
Setting up the Camera Card
1. Locate the wireless SD card marked with a “C” in the top right corner (camera card).
2. Insert the camera card into the printer.
3. Press the Menu button on the printer.
4. Press the down arrow until Wireless Settings is displayed.
5. Press the right arrow until SSID is displayed.
6. Press the down arrow until Setup Camera Card is displayed.
7. Press the right arrow so that Setup Card is displayed.
8. Press the EXEC button to start the setup. The printer will display Please Wait and the light will flash rapidly.
9. Once the light on the printer stops flashing and the printer displays Setup Camera Card, remove the camera
card.
10. Insert the camera card into the camera.
Setting Up the Printer Card
1. Locate the wireless SD card marked with a “P” in the top right corner (printer card).
2. Insert the printer card into the printer.
3. Press the down arrow until Setup Printer Card is displayed.
4. Press the right arrow so that Setup Card is displayed.
5. Press the EXEC button to start the setup. The printer will display Please Wait and the light will flash rapidly.
6. Once the light on the printer stops flashing and the printer displays Setup Printer Card, press Menu to exit
the menu.
To Next Page
Need help?
General
Weight and Dimensions
