- 20 -
Volume
This function is available only, if a memory device
is connected to the USB port or SD card slot.
Press 2 x briefly the MENU button.
The display shows a bar (7 levels).
Set the volume with the / buttons.
Equalizer setting
This function is available only, if a memory device
is connected to the USB port or SD card slot.
Setup bass
Press 3 x briefly the MENU button
The display briefly shows bAS and then switches to the
current value.
Setup a valuy between +-5 with the / buttons.
Press the MENU button once again.
Setup treble
Press 4 x briefly the MENU button
The display briefly shows tre and then switches to the cur-
rent value.
Setup a valuy between +-5 with the / buttons.
Press the MENU button once again.
Dynamic sound
Press 5 x briefly the MENU button
The display briefly shows the current value dyn or noa.
Press the / buttons to select the desired sound
Press the MENU button once again.
Display mode
The display shows remaining playback time only,
if a memory device is connected to the USB port
or SD card slot.
During playback press button for 2 seconds.
The display is changed in the following order:
Description & Functions
MFlysdDEFN-new.indd 20 12.11.2010 11:43:16
To Next Page
Loading...