88 9
AUX MODE BASS BOOST MODE
STEREO LINK FUNCTION
CHARGING
Connect the DOCKIN D MATE DIRECT to a source device
via 3.5mm AUX cable.
1. Connect the source device to the AUX input of the
DOCKIN D MATE DIRECT with the included 3.5mm
stereo cable
2. Begin playback on the source device
The power saving mode of the D MATE DIRECT is deac-
tivated while the AUX cable is connected. When the AUX
cable and the charging cable are connected, this allows
stationary use, for example as a computer speaker.
By simultaneously pressing the „+“ and „-„ buttons for 3 se-
conds, the Bass Boost mode is activated. This will increase
the volume and bass response of the D MATE DIRECT.
APPLICATION EXAMPLES:
• Improve bass reproduction when using outdoors
• Stronger bass response when listening at low
volume
• Stronger bass response for low bass music
Using the Bass Boost mode will slightly reduce the battery
life as it increases the overall volume.
PAIR TWO DOCKIN D MATE DIRECT:
1. Connect the Bluetooth source to the rst D MATE DIRECT
2. Press the pairing button for three seconds on the
rst D MATE DIRECT.
3. Press the pairing button for three seconds on the
second D MATE DIRECT.
4. Pairing the two speakers can take up to 1 minute.
A successful connection is indicated by the perma-
nent illumination of both Bluetooth Status LEDs.
Charge the DOCKIN D MATE DIRECT with the included
USB-C cable. Simply connect to a USB power source (5V,
1A). The charging port is located behind the cover on the
back. When battery is completely discharged, charging
takes about 5 hours.
BATTERY LED COLORS:
When charging, the battery LED ashes. When 100% char-
ge is reached it lights up in a steady green.
10% 30% >30%
EN
EN
To Next Page
Loading...
