88 9
AUX MODE BASS BOOST MODE
STEREO LINK FUNCTION
CHARGING
Connect the DOCKIN D MATE to a source device via
3.5mm AUX cable.
1. Connect the source device to the AUX input of the
DOCKIN D MATE with the included 3.5mm stereo
cable
2. Begin playback on the source device
The power saving mode of the D MATE is deactivated while
the AUX cable is connected. When the AUX cable and the
charging cable are connected, this allows stationary use,
for example as a computer speaker.
By simultaneously pressing the „+“ and „-„ buttons for 3 se-
conds, the Bass Boost mode is activated. This will increase
the volume and bass response of the D MATE.
APPLICATION EXAMPLES:
• Improve bass reproduction when using outdoors
• Stronger bass response when listening at low
volume
• Stronger bass response for low bass music
Using the Bass Boost mode will slightly reduce the battery
life as it increases the overall volume.
PAIR TWO DOCKIN D MATE:
1. Connect the Bluetooth source to the rst D MATE
2. Press the pairing button for three seconds on the
rst D MATE.
3. Press the pairing button for three seconds on the
second D MATE.
4. Pairing the two speakers can take up to 1 minute.
A successful connection is indicated by the perma-
nent illumination of both Bluetooth Status LEDs.
Charge the DOCKIN D MATE with the included USB-C ca-
ble. Simply connect to a USB power source (5V, 1A). The
charging port is located behind the cover on the back.
When battery is completely discharged, charging takes
about 5 hours.
BATTERY LED COLORS:
When charging, the battery LED ashes. When 100% char-
ge is reached it lights up in a steady green.
10% 30% >30%
EN
EN
To Next Page
Loading...
