After stopped recording, press MENU twice to enter the system
setup.
Format： Format the memory card; please backup your data
before formatting.
Language：Support multiple languages; you can choose the
language according to your preferences.
Date/Time：Set the system time.
Frequency：Adjust the light frequency of use of the
environment.
LED : turn on and off light feature
Beep Sound：Switch on or off the system beep indicator
Screen Saver：Set the screen automatic off time, or set it as
always on.
TV Mode：You can toggle between NTSC and PAL when in video
output mode.
Speed Stamp：Toggle on/off speed stamp.
Version： Check the system version number.
Default Setting：Reset all the settings to the default state.
Thank you for purchasing Our company product,
please following the instruction to use the device
correctly.
Our company products are made of top materials to
provide the best quality product with the best image
quality to all customers.
Recording Settings
After stopped recording, press MENU to enter the recording settings.
Toggle on the WDR function.
Resolution Set the recording resolution.
Exposure：Set the exposure value.
White Balance: Adjust for ambient light.
Record Audio：Toggle on or off the sound recording function.
Date Stamp：Toggle on or off the data stamp function.
Loop recording：Set the video length in recording cycle mode, or
toggle off record cycle function.
Gsensor：Set the sensitivity level of the G-sensor file protection .
Motion Detection：Toggle on or off the motion detection recording
function.
Plate stamp: can display the registration number on the video.
Driver fatigue warning: Switch on/off Driver fatigue warning function.
GPS logger: Toggle on of off the GPS logger function.
Speed Display: Set the length of time before the full screen speed
display activating.
GPS speeding warning: Switch on/off GPS speeding warning
function.
Time Zone: Please set your local time zone in accordance with the
reenwich Mean Time.
Password settings: Set the system operation and to protect the
password file security.
Speed Scale: To toggle between KM/H and MPH.
Image rotation: Set the image rotation feature on or off.
WDR：
：
1 2 3
18
12
4 5 6 7 8
10 11
9
14
13
15
16
17
1、Recording in a car without film on windshield can ensure the
best image recorded.
2 Please keep the windshield clean to prevent bad influence
on image quality.
、
3 If windshield wiper can't clean the windshield, please
replace it with a new one, or the image quality in the rainy
day will be influenced.
、
4 Image quality will be better while recording in a sunny day, but
please note in backlight position the image will be darker, it's
the normal reaction while image sensor face the light straightly.
、
5 In order to present a better video and audio quality, we suggest
using the following player software: Storm video, Windows
Media Player,QuickTime Player.
、
1、Indicator
2、Microphone
3、UP
4、DOWN
5、MENU Key
6、MODE/Mute Mode
(Long press)
7、SOS Emergency File Lock
8、EV Adjustment
9、2.7-Inch TFT Display Screen
10 Micro-SD Card Slot
11、USB/Vehicle Charger Power
Supply Port
12、AV Output Jack
13、Power switch
14、Video Recording/Camera/Confirm
15、HDMI Output Jack
16、Reset key
17、LED lamp
18、Speaker
、
1、Please inser t th e me mo r y ca rd i nto the SD Card Slot with
the specified direction, and then use the bracket t o fi x th e
device inside the car.
2、When using the bracke t, p le as e ch oose the position
caref ul ly. D o no t pl ac e th e de vi ce i n the position that
blocks the driver's s ig ht o r af fe ct s th e no rm al w or k of the
airba gs .
3、If there is a ny s pl otch , fi ng er pr in ts o r ot he r ki nd s of
smudginess inside or outside on the wi nd sh ie ld , pl ea se
wipe clean it before proc ee di ng t he i ns ta ll ation.
1、For the users whose vehicle cigarette lighter keeps power
supplying after the engine stopped, please unplug the car
charger before leaving the vehicle.
2、Please use Class 6 or above Micro SD card.
3、Once the file be protected, the file will not be deleted by loop
recording. The device can protect up to 10 files, if the 11th file be
protected, the oldest protected file will be turned to unprotected
file which will be deleted by looping recording.
4、The speed stamp in the video is the result of GPS signal computing,
and will have slight deviation, please take the speed information
on DOD Player as priority.
1、Insert the memory card
2、Connect the car charger into the vehicle
cigarette lighter and the device.
3、Start the vehicle.
4、The device be turned on, and start
recording automatically.
1、WDR works all time
2、Rec ordi ng i ma ge
3、Rec ordi ng m od e
4、Res ol ut io n
5、Loop re co rd in g in 3 m in ut es
length
6、Exposure
7、Micro ph on e
8、Power conne cted
9、Motion Detection
10、Memory Card icon
11、Recording time
12、Date
13、GPS
14、White Balance
15、Speed display
16、GPS speeding warning
17、Driver fatigue warning
18、Time
1、After stopped recording, press MODE to enter the video-play
mode.
2、Press UP or Down to select the desired video to play.
3、Press CONFIRM to start playing video.
4、Press CONFIRM again to pause the video.
Video-Play Operation
Delete Video
1、After stopped recording, press MODE to enter the video-play
mode.
2、Press UP or Down to select the desired video to delete.
3、Press MENU, enter the menu to delete the video or delete all.
Play on Computer
Recommended PC requirements for 1080P 30fps video playing:
1、intel Core 2 Duo 2.0GHz or higher CPU
2、2G or above DDRII RAM
3、Graphic card supports DirectX 10 or above
6、Though this product passes temperature cycling test, in order to
ensure a longer working life, during the hot summer days, please
store the device in cool place while not working.
To Next Page
Need help?
General
