252 MAINTAINING YOUR VEHICLE
License Plate Lamps
(Cargo/Passenger Vans Only)
1. Press the bulb socket to the left, against the force of
the spring, and remove.
2. Replace the bulb, C5W – 12V 5W.
3. Install the cover.
4. Re-install the bulb socket.
Additional Brake Lamp
(Cargo/Passenger Vans Only)
(1) Retaining screws
1. Take out the retaining screws (1) and remove the
lamp housing.
2. To change a bulb, P21W – 12V 21W
Press the bulb into the bulb socket, turn it
counterclockwise and remove.
3. Insert the new bulb.
4. Install the lamp housing.
To Next Page
Loading...
