Dodge 2005 Sprinter - U Exit Lamps (Optional)

256 MAINTAINING YOUR VEHICLE
Exit Lamps (Optional)
(1) Lamp housing
(2) Cable connector
(3) Bulb holder
1. Use a screwdriver on the catch spring to remove the
lamp housing (1).
2. Press the locating spring on the cable connector (2),
hold it down, and remove the cable connector (2).
3. Turn the bulb holder (3) to the left and remove it.
4. Replace the bulb, W5W - 12V 5W.
5. Install the bulb holder (3) and attach the cable
connector (2).