To Enter The Trunk:
• With a valid Keyless Enter-N-Go key fob
located outside the vehicle and within
5 ft (1.5 m) of the deck lid, push the
button located on the center of the light
bar which is located on the deck lid
above the license plate.
NOTE:
Refer to the Owner’ s Manual at
www.dodge.com/en/owners/manuals for
further information.
KEYLESS ENTER-N-GO — IGNITION
Accessory Positions With Engine Off
NOTE:
The following functions are with the driver’ s foot OFF the Brake Pedal/Clutch Pedal
(Transmission in P ARK or NEUTRAL Position).
Starting With The Ignition Switch In The
OFF Position:
• Push the ENGINE ST ART/STOP button
once to change the ignition switch to the
ACC position.
• Push the ENGINE ST ART/STOP button a
second time to change the ignition switch to the RUN position.
• Push the ENGINE START/STOP button a third time to return the ignition switch to the
OFF position.
Trunk Release Button
Accessory Positions
GETTING STARTED
17
To Next Page
Loading...
