The following are general phone to Uconnect威 Phone
pairing instructions:
•
Press the button to begin.
•
After the “Ready” prompt and the following beep, say
“Device Pairing”.
•
When prompted, after the beep, say “Pair a Device”
and follow the audible prompts.
•
For identification purposes, you will be prompted to
give the Uconnect威 Phone a name for your mobile
phone. Each mobile phone that is paired should be
given a unique phone name.
•
You will then be asked “Should paired device be set as
Favorite?” If yes this phone will become the highest
priority. You can pair up to seven mobile phones to
your Uconnect威 Phone. However, at any given time,
only one mobile phone can be in use, connected to
your Uconnect威 System. The priority allows the
Uconnect威 Phone to know which mobile • phone to
use if multiple mobile phones are in the vehicle at the
same time.
•
Start paring procedure on device. See device manual
for instructions.
•
Select Uconnect威 on the device and enter the four-digit
Personal Identification Number (PIN) displayed on
radio into your mobile phone.
Dial By Saying A Number
•
Press the button to begin.
•
After the “Ready” prompt and the following beep, say
“Dial”.
•
The system will prompt you to say the number you
want to call.
•
For example, you can say “234-567-8901”.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121
To Next Page
Loading...
Need help?
General
