NOTE:
•
The ignition switch must be in the ON or ACC
position before the CD player will operate.
•
The CD Player is part of the radio for the Media Center
200 (Sales Code RAE).
CD Player Operating Instructions
Loading
To insert disc into the player, follow the instructions
shown:
1. Gently insert the disc with the label facing the rear of
the vehicle while the light below the loading slot is
illuminated. The disc will automatically be pulled into
the CD player.
2. Upon insertion, the disc will begin to play, and the
light below the loading slot will turn off.
EJECT (EJT) Button
If there is a disc in the CD player, press the EJT button
and the disc will eject. If you do not remove the disc
within 10 seconds, it will be reloaded.
Uconnect威 — If Equipped
If equipped with Uconnect威 8.4, refer to the Uconnect威
8.4 manual for further information.
CD Player
4
UNDERSTANDING YOUR INSTRUMENT PANEL 351
To Next Page
Loading...
Need help?
General
