Towing Tips
Before setting out on a trip, practice turning, stopping
and backing the trailer in an area away from heavy
traffic.
Manual Transmission – If Equipped
If using a manual transmission vehicle for trailer towing,
all starts must be in first gear to avoid excessive clutch
slippage.
Automatic Transmission – If Equipped
The DRIVE range can be selected when towing. How-
ever, if frequent shifting or changes in engine speed occur
while in this range, use the AutoStick威 shift control to
select a lower gear ratio.
NOTE: Using a lower gear ratio while operating the
vehicle under heavy loading conditions, will improve
performance and extend transmission life by reducing
excessive shifting and heat buildup. This action will also
provide better engine braking. If you REGULARLY tow a
trailer for more than 45 minutes of continuous operation,
then change the transmission fluid and filter as specified
for ⬙police, taxi, fleet, or frequent trailer towing.⬙ Refer to
the ⬙Maintenance Schedule⬙ for the proper maintenance
intervals.
AutoStick威
When using the AutoStick威 shift control, select the high-
est gear that allows for adequate performance and avoids
frequent downshifts. For example, choose ⬙4⬙ if the
desired speed can be maintained. Choose ⬙3⬙ or ⬙2⬙ if
needed to maintain the desired speed.
Extended driving at high RPM should be avoided to
prevent excess heat generation. A reduction in vehicle
speed may be required to avoid extended driving at high
RPM. Return to a higher gear or vehicle speed when
grade or road conditions allow.
5
STARTING AND OPERATING 477
To Next Page
Loading...
Need help?
General
