• Place the ignition switch in the ON/RUN position, select Remote Linked to
Memory in the Electronic Vehicle Information Center (EVIC) and enter Yes.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed
Key Fob.
• Refer to the Owner's Manual on the DVD for further details.
Manual Seat Adjustment
Forward/Rearward
• Lift up on the adjusting bar located at the front of the seat near the floor and
release when seat is in desired position.
Recliner
• Lift the rear lever located on the outboard side of the seat, lean back and release
when seat is in desired position.
GETTING STARTED
20
To Next Page
Loading...
