JACKING AND TIRE CHANGING
Jack Location
• The scissor-type jack and tire changing tools are located in rear cargo area, below
the load floor.
• Rotate the plastic thumb screw on the end of the jack to remove the jack from the
bracket.
Spare Tire Stowage
• The spare tire is stowed under the rear
of the vehicle by means of a cable
winch mechanism. To remove or stow
the spare, use the jack handle/lug
wrench connected to the square socket
extension to rotate the “spare tire
drive” nut. The nut is located under a
plastic cover at the center-rear of the
cargo floor area, just inside the liftgate
opening.
WHAT TO DO IN EMERGENCIES
94
To Next Page
Loading...
