ROOF LUGGAGE RACK
• The crossbars on your vehicle are delivered stowed within the roof rack side rails.
When installed, the roof rack can hold a maximum of 150 lbs (68 kg) of evenly
distributed weight.
Installing The Crossbars
• To install the crossbars, completely loosen the thumb screws at both ends and lift
the crossbar from its stowed position.
• Bend the pivot points at each end of the crossbar and slide the thumb screw down.
• Set the crossbars into position and tighten the thumb screws.
NOTE: Position the crossbars across the roof making sure the letters on the crossbar
align with the matching letters on the side rail.
• Refer to the Owner's Manual on the DVD for further details.
UTILITY
85
To Next Page
Loading...
