Automatic High Beam — If
Equipped
This system automatically controls the operation
of the headlamp high beams as oncoming vehicles
approach.
• The Automatic High Beam Headlamp Control
can be turned on or off using the Uconnect
System.
• Push the turn signal lever away from you.
• With the headlight switch in the “AUTO” posi-
tion, the high beams are controlled automati-
cally
• Pull the turn signal lever toward you to manu-
ally deactivate the system.
• To improve system recognition of crossing traf-
fic and to limit use in a residential area, the
vehicle must be moving at a speed greater than
20 mph (32 km/h) before the Automatic High
Beam Module (AHBM) begins requesting high
beam activation.
NOTE:
If the windshield or Automatic High Beam Head-
lamp Control mirror is replaced, the mirror must
be re-aimed to ensure proper performance. See
your local authorized dealer.
Instrument Cluster Display
Selectable Menu Items
The instrument cluster features a driver interac-
tive display that is located in the of the center of
the instrument cluster. Pushing the controls on
the left side of the steering wheel allows the driver
to select vehicle information and Personal Set-
tings. Push the up or down arrow buttons to scroll
through the main menu feature items. To enter the
submenu’s of a feature menu item push the left or
right arrow buttons then push the OK button to
select or reset the submenu feature items:
• Speedom-
eter
• Vehicle
Info
• Driver
Assist
• Fuel
Economy
•
Trip
•
Stop/Start
•
Audio
•
Navigation
• Screen
Setup
For further information and additional warnings
and cautions, refer to your Owner’s Manual on
www.dodge.com/en/owners/manuals.
LIGHTS
INSTRUMENT CLUSTER
DISPLAY
To Next Page
Loading...
