Key Fob Battery Low
In case the ignition state does not change with the
push of a button, the key fob may have a low or
dead battery. In this situation, a backup method
can be used to activate the ignition. Put the nose
side (side opposite of the emergency key) of the
key fob against the ignition START/STOP button
and push to operate the ignition.
NOTE:
The ignition START/STOP button is fixed directly
to the instrument panel and cannot be removed
for alternate methods of starting.
For further information and applicable warnings
and cautions, please refer to your Owner’s Manual
at www.dodge.com/en/owners/manuals.
Keyless Enter-N-Go — Passive
Entry
The Keyless Enter-N-Go system is an enhance-
ment to the vehicle’s key fob. This feature allows
you to lock and unlock the vehicle’s door(s) and
liftgate without having to press the key fob lock or
unlock buttons.
Introduction To Keyless
Enter-N-Go
The Keyless Enter-N-Go system is an enhance-
ment to the vehicle's key fob. This feature allows
you to lock and unlock the vehicle's door(s) and
liftgate without having to push the key fob lock or
unlock buttons as well as starting and stopping the
vehicle with the push of a button.
Low Or Dead Key Fob Battery Starting
Procedure
KEY FOB
PASSIVE ENTRY
To Next Page
Loading...
