Compass Settings — If Equipped
After pressing the “Compass Settings” button on the touchscreen, the following settings will be available:
NOTE: Before compass calibration is performed, the compass variance zone should be set for best results.
Setting Name Selectable Options
Compass Variance 1 23456789101112131415
NOTE:
When the “Compass Variance” feature is selected, it allows the compass variance to be set to any number from 1 to 15
per the compass variance zone map figure.
Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences,
the variance should be set for the zone where the vehicle is being driven, illustrated in the zone map. Once properly set,
the compass will automatically compensate for the differences when calibrated, and provide the most accurate compass
headings.
292 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
