To Disengage The Manual Park Release Lever:
1. To disengage the Manual Park Release Lever, apply
tension upward while pushing the release latch towards
the tether to unlock the lever.
2. Once the tension has been released and the lever has
been unlocked, be sure it is stowed properly and locks
into position.
NOTE: Be sure to replace the cover by snapping it back in
place.
TOWING A DISABLED VEHICLE
This section describes procedures for towing a disabled
vehicle using a commercial towing service. If the transmis-
sion and drivetrain are operable, disabled vehicles may
also be towed as described under “Recreational Towing” in
the “Starting and Operating” section.
Release Latch
Stowed Position
6
WHAT TO DO IN EMERGENCIES 497
To Next Page
Loading...
