EasyManua.ls Logo

Dodge DURANGO 2017 - Trailer Hitch Receiver Cover Removal - if Equipped

Dodge DURANGO 2017
586 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE:
The trailer tongue weight must be considered as part of
the combined weight of occupants and cargo, and
should never exceed the weight referenced on the Tire
and Loading Information placard. Refer to “Tire Safety
Information” in this section for further information. The
addition of passengers and cargo may require reducing
trailer tongue load and Gross Trailer Weight (GTW).
Redistributing cargo (to the trailer) may be necessary to
avoid exceeding Rear Gross Axle Weight Rating
(GAWR) of 3,900 lbs (1 769 kg).
Vehicles not factory equipped with trailer tow package
are limited to 3,500 lbs (350 lbs tongue weight).
Trailer Hitch Receiver Cover Removal
If Equipped
Your vehicle may be equipped with a trailer hitch receiver
cover, this must be removed to access the trailer hitch
receiver (if equipped). This cover is located at the bottom
center of the rear fascia.
1. Turn the two locking retainers located at the bottom of
the hitch receiver cover a 1/4 turn counterclockwise and
pull bottom of the hitch receiver cover outward (to-
wards you).
Hitch Receiver Cover Retainers
1 Hitch Receiver Cover
2 Locking Retainers
5
STARTING AND OPERATING 461

Table of Contents

Other manuals for Dodge DURANGO 2017

Related product manuals