IN CASE OF EMERGENCY 367
There are two ways to assemble the tools:
Assembled For Spare Tire Lowering/Raising
Assembled For Spare Tire Lowering/Raising
Assembled For Jack Operation
Assembled For Jack Operation
1 — Lug Wrench
2 — Extension 2
3 — Extension 3
4 — Extension 4
CAUTION!
The lug wrench can only be attached to exten-
sion two (2).
When attaching the tool to the winch mecha-
nism be sure the large flared end opening on
extension four (4) is positioned correctly over
the winch mechanism adjusting nut.
Damage to the lug wrench, extensions and
winch mechanism may occur from improper
tool assembly.
1 — Lug Wrench
2 — Extension 2
3 — Extension 3
4 — Extension 4
5 — Jack Driver
WARNING!
After using the jack and tools, always reinstall
them in the original carrier and location. While
driving you may experience abrupt stopping, rapid
acceleration or sharp turns. A loose jack, tools,
bracket or other objects in the vehicle may move
around with force, resulting in serious injury.
7
22_DJD2_OM_EN_USC_t.book Page 367
To Next Page
Loading...
