EasyManua.ls Logo

DOEPFER Dark Energy - MIDI to CV;Gate Interface Functions

DOEPFER Dark Energy
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Dark EnerGy
DOEPFER
Functionality
3.3.2. MIDI to CV/Gate interface
SinceDarkEnergy‘ssoundgenerationworksentirelyrealanalogueandrealanaloguecontrolvoltagesand
gatesignalsareusedinternally,theunitfeaturesacompleteUSB/MIDItoCV/Gateinterface.
This integrated USB/MIDI to CV/Gate interface generates not only a pitch control voltage and a gate signal
totriggertheenvelope,italsoprovidesseveralcontrolvoltagesderivedfromincomingMIDIvelocityand
MIDIcontrollerdata.TheMIDItoCVinterfacealsofeaturesasimplebutusefularpeggiatorandasocalled
referencetone.YouhavemetthereferencetonebeforetoselecttheMIDIchannel–itistheMIDInote,that
setsDarkEnergy‘spitchCV1to0VoltsandthusbecomesthelowestnoteofDarkEnergy‘snoterange.
AllCVsandgatesignalsareprovidedviasocketsonthebackpanelofDarkEnergy.Usepatchcordsto
connectthemwiththemoduleinputsonDarkEnergy‘sfrontpanel.Soyoucancontrolthemostimportand
soundparameters dynamically via MIDI velocity and a MIDI controller.
Youmay„abuse“DarkEnergy‘sMIDItoCV/gateinterfacetocontrolanother,notMIDIedanaloguesynthe-
sizerthattstothespecicationsofDarkEnergy.
DependingontheincommingMIDIdata(noteon/off,notenumber,pitchbend,MIDIcontroller,velocity)the
interface generates:
•Thegatesignalfortheenvelopegenerator,
•CV1:controlledbyMIDInotenumbers;1V/octscaling(internallyconnectedwiththeVCOspitch
controlinput)
•CV2:controlledbyMIDIpitchbenddata(rangesapprox.-2,5Vto+2,5Vor0Vto+5V,selectedablevia
internaljumper).CV2hasnointernalconnection,itcanbepatchedtothecontrolinputsonDarkEnergy‘s
frontpanel as desired.
•CV3:controlledbyvolumeortheproductofvolumeandvelocity(selectablevialearnmode).CV3hasno
internalconnection,itcanbepatchedtothecontrolinputsonDarkEnergy‘sfrontpanelasdesired.Please
refertopage20,section(2).
•CV4:controlledbyafreeselectableMIDIcontrollerortheproductofcontrollerdataandvelocity
(controllernumberselectablevialearnmode).CV4hasnointernalconnection,itcanalsobepatchedto
thecontrolinputsonDarkEnergy‘sfrontpanelasdesired.Pleaserefertopage20,section(2).
Bychanginganinternaljumper,theCV4socketcanbecomeasecondaudiooutput.Inthiscase,CV4is
notavailableanymore.ThismodenablesyoutouseDarkEnergywithoutanycablepluggedintothe
frontpanel. The default setting is CV4.