EasyManua.ls Logo

Dogtra Pathfinder - Software Installation and Pairing; Installing the Pathfinder App; Compatible Devices

Dogtra Pathfinder
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN Pathfinder Code Setting Guide
To set the pairing for Dogtra Pathnder GPS connector to a GPS Collar or an
additional GPS Collar, follow the steps below.
1. GPS Connector
1) The Select button is used to turn on and select
a device to pair. While turned on, press the
Select button once to set pairing to the GPS
Collar.
2) Press and hold down the Connect button until
the LED blinks rapidly. The GPS Connector will
now be ready for pairing.
*
Using the Select button, set the GPS Connector
to Collar to pair the GPS Connector with the
GPS Collar. Setting the GPS Connector to Phone
is used to pair the GPS Connector to a phone.
2. GPS Collar
To place the GPS Collar into pairing mode, begin
with the device turned o and hold down the
Power button until the LED blinks rapidly. A
melody will be played when the GPS Collar is in
pairing mode.
*
The GPS Collar pairing mode is used to pair the
GPS Collar and the GPS Connector. The Pathnder
set comes with both parts paired to each other.
Charger Info
Manufacturer : HON-KWANG
Manufacturing country : CHINA
Model name : HK-AR-050A200-EU
INPUT : 100-240V ~ 50/60Hz 0.35A / OUTPUT : 5V 2A
*
During battery charging, the unit must be close to the wall outlet and the
wall outlet must be easily accessible for security reasons.
Do not use more than one splitter cable with a single battery charger.
WARNING
EU DECLARATION OF CONFORMITY
Applicant : Dogtra Co., Ltd. Manufacturer : Dogtra Co., Ltd.
Declare the following apparatus
Product Name : Pathnder / Model Name : PT10E
Frequency Range : SRD (169.400 MHz ~ 169.475 MHz), BT (2402 MHz ~ 2480 MHz)
Output Power(Rated Power, Plus Tolerance) : SRD (26.38 dBm), BT (2.9 dBm)
Accessories that impact RF Compliance : N/A
RF Software/Firmware that impacts RF Compliance : N/A
Declares that the product(s) listed above conform(s) to following documents
Essential Requirement Applied Standards
Article 3.1(a) Safety
EN 60950-1: 2006+A11:2009+A1:2010+A12:2011
+A2:2013
Article 3.1(a) Health EN 62479:2010
Article 3.1(b) EMC
ETSI EN 301 489-1 V2.1.1(2017-02)
ETSI EN 301 489-3 V2.1.1(2017-03)
ETSI EN 301 489-17 V3.1.1 (2017-02)
EN 61000-3-2:2014 / EN 61000-3-3:2013
Article 3.2(b) Radio
ETSI EN 300 220-1V3.1.1(2017-02)
ETSI EN 300 220-2V3.1.1(2017-02)
ETSI EN 300 328 V2.1.1(2016-11)

Other manuals for Dogtra Pathfinder

Related product manuals