To Next PageTo Next Page
Need help?Do you have a question about the Doheny's 2716 and is the answer not in the manual?
Emphasizes the critical need to read and adhere to all safety guidelines provided.
Advises against children using or climbing on the product and stresses constant supervision.
Details hazards and precautions related to electrical shock, including proper wiring and grounding.
Warns about the dangers of hair, limb, and body entrapment in suction outlets.
Describes the risk of hair becoming entangled in suction outlet covers.
Explains the hazard of limbs becoming mechanically bound in suction outlet openings.
Highlights the risk of pressure-applied entrapment affecting large body parts.
Warns about severe internal injury from negative pressure on unprotected suction outlets.
Identifies the risk of objects like jewelry or fingers getting caught in suction outlet openings.
Provides guidelines for installing multiple suction outlets to prevent entrapment.
Alerts to risks associated with system pressure during pump operation and start-up.
Warns of violent separation of pump components due to improper assembly or operation.
Covers risks of fires from motor heat and burn hazards during maintenance.
Details requirements for properly grounding and bonding the motor for electrical safety.
Ensures the electrical supply voltage matches the motor's nameplate for optimal performance.
Specifies adherence to NEC and local codes for safe electrical connections.
Outlines essential checks and procedures before initial pump operation.
Explains the process of filling the pump and suction line with water for priming.
Provides guidance on replacing worn or damaged shaft seals for pump longevity.
Details steps for properly draining and storing the pump to prevent damage during cold weather.
Lists common causes and solutions for a motor that fails to start.
Identifies reasons for motor shutdown, such as low voltage or thermal overload.
Addresses issues where the motor makes noise but doesn't run, like jammed impellers.
Provides steps to diagnose and fix problems preventing the pump from priming.
Offers solutions for reduced water flow, such as clogged lines or undersized piping.
Explains causes of pump noise, including air leaks, vibration, or bearing issues.
Presents a table with performance specifications like HP, VOLT, AMPS, GPM, and HEAD.
General| Brand | Doheny's |
|---|---|
| Model | 2716 |
| Category | Water Pump |
| Language | English |
