DP564 Multichannel Audio Decoder Menus
4-15
4.4.5 Monitor Configuration
The Monitor Configuration menu is used primarily to configure your
listening environment for accurate monitoring of all content. For details on how to set
up your listening room, see Chapter 5, Listening Room Calibration, which covers
Digital Ref, Dim Gain, Channel Trims, Speaker Delays, and
Speaker Config.
4.4.6 System Settings
The System Settings menu includes these parameter adjustment menus:
• Unit Name
• Unit Address
• Timecode Display
• Screensaver Timeout
• Screensaver Design
• Network Settings
Unit Name
You can give your unit a name, using up to 12 characters. This is useful to identify
the DP564 from the DolbyRemote 564 software. You can also use the unit name for
the screensaver. Select Unit Name, press
Enter, and you see the text entry display
shown in Figure 4-7.
ABCDEFGHIJKLM/
NOPQRSTUVWXYZ_
Ø123456789.:-~
Unit Name
Model DP564
OK Del Space Clear !
Figure 4-7 Unit Name Text Entry Screen
To Next Page
