Contents
1 Introduction to the Dolby DP591 audio encoder documentation 6
1.1 Speaker name abbreviations 6
1.2 Questions and feedback 6
1.3 Using this information 7
1.4 Branding guidelines 7
1.5 Patent information 7
2 Overview of the Dolby DP591 audio encoder 8
2.1 Supported Dolby technologies 8
2.2 Bill of materials 8
2.3 DP591 front panel 8
2.4 DP591 rear panel components 9
2.4.1 DP591 rear panel component descriptions 9
2.5 Inputs and outputs 10
2.6 Clock source priority 10
2.7 Specifications and requirements 11
2.7.1 Environmental specifications 11
2.7.2 Power requirements 11
2.7.3 Dimensions 12
3 Installation of the Dolby DP591 audio encoder 13
3.1 Installing the hardware 13
3.2 Configuring the network settings 13
3.2.1 Configuring the command port 14
3.2.2 Modifying network settings 14
3.3 Starting up or rebooting the system 14
3.4 Upgrading the system software 15
4 DP591 operation 16
4.1 Encoding from SDI input 16
4.1.1 Encoding Dolby Digital Plus with Dolby Atmos content in
manual pair selection mode 16
4.1.2 Encoding Dolby Digital Plus with Dolby Atmos content in
automatic pair selection mode 16
4.1.3 Setting up ED2 Encode 17
4.2 Encoding from the MADI input 18
4.3 Decoding ED2 from SDI input 18
4.4 Encoder setup 18
4.5 Modifying network settings 19
5 Administrative controls 20
5.1 Resetting the system settings 20
6 Web client UI 21
6.1 DP591 navigation bar 21
6.2 DP591 display bar 21
7 Log files 23
7.1 Checking the event logs 23
Dolby DP591 audio encoder quick-start guide
16 August 2016 4
To Next Page
Loading...
