7
•Check the work area whether
there are no stones, wires,
glass, or other foreign objects.
Foreign object may be caught
up or ung by the machine,
resultindamageorinjury.
•Operate the machine under
good visibility and daylight
conditionsonly.Donotoperate
themachineindarknessorfog.
•Do not operate machine in
explosive atmospheres, such
asinthepresenceofammable
liquids, gases or dust. The
machine creates sparks which
mayignitethedustorfumes.
•Do not expose the machine to
rain or wet conditions. Water
entering the machine may
increase the risk of electric
shock.
Starting up the machine
•Before connect the plug or
switchonthemachine:
– Checktheplugandcordand
conrm that they are good
condition.
– Check all the screws, nuts
and other fasteners are
properlysecured.
– Check cutting tools are in
place and good working
condition.
– Check guards and safe
devices, such as deectors
or grass catcher, function
well.
– Checktheairventsarenot
covered by dust or other
foreign materials. Clean
them with a soft brush or
clothiftheyareblocked.
– Replace damaged or
unreadablelabels.
– Check all the parts of
the machine carefully to
determine if it operates
properly and performs
its intended function.
Especially, never use the
machine if the switch does
notworknormally.
– Make sure theswitchis off
sidetopreventunintentional
start.
– Check all tools for
maintenance, such as
adjustingwrenchorspanner
areremoved.
•If the supply cord is damaged,
ask Dolmar authorized service
centertoreplaceit,alwaysuse
genuinereplacementparts.
•Neverusethemachineifsafety
device,suchasdeectorguard
orgrasscatcher,isdamagedor
missing.
•Whenturningonthemotor:
– Keep your feet away from
thecuttingtools.
– Donottiltthemachine.
– Donotstandinfrontofthe
dischargeopening.
To Next Page
Loading...
