To Next PageTo Next Page
Need help?Do you have a question about the Dolmar MS-22C and is the answer not in the manual?
User guidance for safe operation, emphasizing reading the manual and proper handling.
Specifies the machine's purpose and limitations to prevent injury.
Details essential protective gear like helmets, goggles, ear protection, overalls, gloves, and safety shoes.
Pre-operation checks and safety measures before starting the string trimmer.
Step-by-step instructions for starting the string trimmer engine safely and correctly.
Guidelines for safe refueling, including fuel mixture, handling, and storage.
Safe operating techniques, including lighting, footing, cutting height, and debris removal.
Proper selection and use of cutting tools for different materials.
Essential maintenance tasks and precautions to ensure longevity and safety.
Procedures and information to provide in case of an accident or injury.
Step-by-step guide for connecting the engine and shaft components.
Instructions for correctly attaching the handle assembly to the trimmer.
Precautions for handling fuel, including ventilation, skin contact, and eye protection.
Correct gasoline and two-stroke oil mixing ratios and important considerations.
Steps for refueling the machine and guidelines for safe fuel storage.
Instructions on attaching and detaching the shoulder strap and general machine handling.
Steps for starting the string trimmer, including cold start procedures.
Procedure for starting a warm engine, omitting the choke step.
How to safely shut down the string trimmer after use.
How to adjust the engine's idle speed for proper operation.
Guidance on the optimal speed and method for using the nylon cutting head.
Troubleshooting steps if the nylon cord does not feed out correctly.
Detailed instructions for winding and replacing the nylon cutting line.
Routine checks and cleaning tasks to be performed daily.
Step-by-step guide for cleaning the air filter element.
How to inspect, gap, clean, or replace the spark plug.
Instructions for supplying grease to the gear case at regular intervals.
Guidance on inspecting and replacing the fuel filter felt.
How to clean carbon deposits from the muffler exhaust.
Procedures for preparing the machine for long-term storage, including draining fuel.
A schedule outlining maintenance tasks by frequency (daily, weekly, quarterly).
A table to help diagnose and identify common faults and their causes.
How to get the machine serviced under warranty.
Limitations and exclusions of the warranty coverage.
Owner's duties regarding maintenance and presenting the machine for service.
Responsibilities for maintaining emission control systems and warranty repairs.
Procedure for making a warranty claim related to emission control defects.
General
