Dolmar MS-251 User Manual

English / Itariano / Spanish
DOLMAR
К УУ
Brush
Cutter
Grass
trimmer
_
u
Decespugliatore
d
Strimmer
S
Desbrozadora
Desbrozadora
MS-220,
MS-2200
MS-221,
MS-2201
MS-250,
MS-2500
MS-251,
MS-2501
LT-250
INSTRUCTION MANUAL
^ 3TRUZIONI D'USO
MANUAL DE INSTRUCCIONES
MS-220 / MS-250 MS-221 / MS-25t LT-250
MS-2200
/
MS-2500
MS-2201
/
MS-2501
>
ZE
Loop
handle
type
Loop
handle(CENitype
|
ү
Tipo
con
manico
ad
anello
Tipo
con
manico
ad
anello(CEN)
Manubrio
tipo
cerrado
Manubrio
tipo
cerrado(CEN)
Important:
Read
this
instruction
manual
carefully
before
putting
the
brush
cutter
or
grass
trimmer
into
operation
and
strictly
observe
the
safety
regulations!
|
Preserve instruction manual carefully!
Importante:
Prima
di
far
funzionare
il
decespugliatore
o
tagliabordi,
leggete
attentamente
questo
manuale
di
istruzioni
e
osserrvate
scrupolosamente
gli
avvertimenti
sulla
sicurezza.
Conservate questo manuale di istruzioni in un luogo sicuro.
Importante: i
Lea
cuidadosamente
este
manual
de
instrucciones
antes
de
poner
en
funcionamiento
ia
desbrozadora,
y
cumpia
estrictamente
{as
normas
de
seguridad.
Guarde cuidadosamente este manual de instrucciones.

Dolmar MS-251 Specifications

General

Engine	2-stroke
Fuel Tank Capacity	0.5 l
Shaft Type	Straight
Idle Speed	2800 rpm
Max. Engine Speed	10000 rpm

Summary

SAFETY INSTRUCTIONS

General Instructions

User must read manual for safe operation and to avoid risks.

Personal Protective Equipment (PPE)

Essential gear like helmet, goggles, ear protection, gloves, and sturdy shoes.

Starting Up the Machine

Pre-operation checks for safety, including clearing the area and checking the tool.

Refuelling

Handling Fuel Safely

Precautions for handling fuel, including ventilation, avoiding skin/eye contact, and inhalation.

Method of Operation

Kickback Prevention

How to avoid dangerous kickbacks by operating the tool correctly and in safe zones.

Maintenance Instructions

Assembling of Engine and Drive Shaft

Engine and Drive Shaft Assembly Steps

Detailed instructions and illustrations for assembling engine and drive shaft.

Mounting of Handle

Handle Installation Guide

Mounting of Protector

Protector Installation Instructions

Mounting of Cutter Blade or Nylon Cutting Head

Attaching Cutting Attachments

Fuel / Refuelling

Fuel and Oil Mixture Ratio

Safe Refuelling Procedure

Handling of Machine

Starting the Engine

Detailed instructions for starting the engine, including cold and warm start procedures.

Stopping the Engine

Servicing Instructions

Daily Checkup and Maintenance