Dolmar MS-250 - User Manual

English / Itariano / Spanish
DOLMAR
К УУ
Brush
Cutter
Grass
trimmer
_
u
Decespugliatore
d
Strimmer
S
Desbrozadora
Desbrozadora
MS-220,
MS-2200
MS-221,
MS-2201
MS-250,
MS-2500
MS-251,
MS-2501
LT-250
INSTRUCTION MANUAL
^ 3TRUZIONI D'USO
MANUAL DE INSTRUCCIONES
MS-220 / MS-250 MS-221 / MS-25t LT-250
MS-2200
/
MS-2500
MS-2201
/
MS-2501
>
ZE
Loop
handle
type
Loop
handle(CENitype
|
ү
Tipo
con
manico
ad
anello
Tipo
con
manico
ad
anello(CEN)
Manubrio
tipo
cerrado
Manubrio
tipo
cerrado(CEN)
Important:
Read
this
instruction
manual
carefully
before
putting
the
brush
cutter
or
grass
trimmer
into
operation
and
strictly
observe
the
safety
regulations!
|
Preserve instruction manual carefully!
Importante:
Prima
di
far
funzionare
il
decespugliatore
o
tagliabordi,
leggete
attentamente
questo
manuale
di
istruzioni
e
osserrvate
scrupolosamente
gli
avvertimenti
sulla
sicurezza.
Conservate questo manuale di istruzioni in un luogo sicuro.
Importante: i
Lea
cuidadosamente
este
manual
de
instrucciones
antes
de
poner
en
funcionamiento
ia
desbrozadora,
y
cumpia
estrictamente
{as
normas
de
seguridad.
Guarde cuidadosamente este manual de instrucciones.

Summary

SAFETY INSTRUCTIONS

General Instructions

General safety guidelines for brush cutters and grass trimmers.

Personal protective equipment

Required PPE for safe operation.

Starting up the brush cutter or grass trimmer

Procedures for safe startup.

Refuelling

Handling fuel and safety precautions

Precautions for handling fuel safely.

Fuel and oil mixture guidelines

Correct fuel-oil mixture for the engine.

Refuelling procedure

Method of operation

General operating guidelines

Best practices for using the equipment.

Kickback

Understanding and managing kickback risks.

Kickback prevention

Techniques to avoid dangerous kickbacks.

Cutting Tools

Maintenance instructions

Routine maintenance procedures.

DESIGNATION OF PARTS

Parts identification for models

Assembling of engine and drive shaft

Assembly for machines with Loop handle

Step-by-step assembly for loop handle models.

Assembly for machines with U handle

Step-by-step assembly for U handle models.

Assembly for machines with Loop handle (CEN)

Step-by-step assembly for CEN loop handle models.

Mounting of handle

Handle mounting for U handle machines

Handle mounting for Loop handle models

Mounting of protector

Protector installation for various models

How to install protective guards for different cutting tools.

Protector mounting for LT-250

Mounting of cutter blade or nylon cutting head

Attaching cutting tools for MS series

Attaching cutting tools for LT-250

Fuel; Refuelling

Handling fuel and safety precautions

Precautions for handling fuel safely.

Fuel and oil mixture guidelines

Recommended fuel to oil ratios.

Refuelling procedure

Handling of machine

Attachment and detachment of shoulder strap

Starting the engine (Warm start)

Steps for starting a warm engine.

Starting the engine (Cold start)

Steps for starting a cold engine.

Stopping the engine

How to safely stop the engine.

Idle adjustment

Checking and adjusting idling speed

Nylon cutting head operation

Using the nylon cutting head effectively

Replacing the nylon cord

Procedure for replacing nylon cord

Servicing instructions

Daily checkup and maintenance

Cleaning of air cleaner

Checkup of spark plug

Spark plug inspection and adjustment

Suction head in the fuel tank

Fuel filter inspection and replacement

Storage

Long-term storage procedures

Maintenance schedule

Scheduled maintenance tasks

Fault location

Troubleshooting common faults

Identifying and resolving common operational problems.

Dolmar MS-250 Specifications

General

Brand	Dolmar
Model	MS-250
Category	Brush Cutter
Language	English