Dolmar PC-6412 S - Accessories

31
Extract from the spare parts list
Use only original DOLMAR parts. For repairs and
replacement of other parts, see your DOLMAR service centre.
PC-6412 S, 6414 S
PC-7312 S, 7314 S
PC-8114, PC-8116
Pos. DOLMAR-No. Qty. Denomination
Synthetic resin cutting disc
1 966 121 150 1 Cutting disc for steel, dia. 300/20 mm
966 141 150 1 Cutting disc for steel, dia. 350/20 mm
966 144 150 1 Cutting disc for steel, dia. 350/25,4 mm
966 161 150 1 Cutting disc for steel, dia. 400/20 mm
1 966 121 120 1 Cutting disc for masonry, dia. 300/20 mm
966 141 120 1 Cutting disc for masonry, dia. 350/20 mm
966 144 120 1 Cutting disc for masonry, dia. 350/25,4 mm
966 161 120 1 Cutting disc for masonry, dia. 400/20 mm
3 994 280 250 1 Hex screw M8x25
4a 965 300 470 1 V-belt (for PC-6412 - 7314)
4b 965 300 490 1 V-belt (for PC-8114)
4b 965 300 480 1 V-belt (for PC-8116)
5 963 601 120 1 Suction head
6 010 114 091 1 Tank cap, compl. (fuel)
8 394 173 020 1 Inner Þ lter
9 394 173 010 1 Air Þ lter insert (paper cartridge)
10 326 173 080 1 Pre-Þ lter (foam, for PC-6412 - 7314)
10 326 173 090 1 Pre-Þ lter (foam, for PC-8114, 8116)
11 965 603 021 1 Spark plug
12 122 164 010 1 Starter cable ø4,0x1000 mm
13 001 161 020 1 Starter grip
14 394 163 020 1 Return spring in housing
15 923 208 004 2 Hexagonal nut M8
16 941 719 140 1 Universal wrench SW 13/19
17 940 827 000 1 Offset screwdriver T27
18 944 340 001 1 Screwdriver (carburetor)
Accessories (not delivered with the Power Cut)
Diamond cutting disc
22 966 221 020 1 Concrete Standard, dia. 300/20 mm
22 966 321 020 1 Concrete DiaDuran, dia. 300/20 mm
22 966 221 010 1 Asphalt Standard, dia. 300/20 mm
22 966 321 010 1 Asphalt DiaDuran, dia. 300/20 mm
22 966 241 020 1 Concrete Standard, dia. 350/20 mm
22 966 341 020 1 Concrete DiaDuran, dia. 350/20 mm
22 966 241 010 1 Asphalt Standard, dia. 350/20 mm
22 966 341 010 1 Asphalt DiaDuran, dia. 350/20 mm
22 966 244 020 1 Concrete Standard, dia. 350/25,4 mm
22 966 344 020 1 Concrete DiaDuran, dia. 350/25,4 mm
22 966 244 010 1 Asphalt Standard, dia. 350/25,4 mm
22 966 344 010 1 Asphalt DiaDuran, dia. 350/25,4 mm
- 394 228 121 1 Adapter ring, dia. 20/25,4 mm
24 010 114 081 1 Angle fuel-tank Þ ller neck, cpl.
25 700 394 322 1 Guide trolley PT-2000 cpl.
26 957 802 200 1 Pressure water tank, cpl.
27 394 365 101 1 Mains water connection, cpl.
28 394 114 271 1 Stand with rollers, complete
(included only with PC-8116, but without items 29, 30, 31)
29 394 114 240 2 Bushing
30 394 114 230 2 Roller
31 908 006 355 2 Star-head screw
32 913 350 164 4 Star-head screw
- 949 000 035 1 Combined can (for 5l fuel, 2.5l oil)
- 980 008 127 1 Filter cleaner (0.5l)
- 980 008 128 1 Air-Þ lter oil (1.0l)