8
Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions
To remove the
kinks, stretch
the cable out
completely and let
it sit for at least a
day in the sun.
If you notice debris
trapped in the
impeller open
the impeller and
remove the debris.
If the pool cleaner will not be in use for an extended
period, perform the following storage steps:
s Make sure that no water is left in the pool cleaner.
s Thoroughly clean the filter bag and insert in place.
s Roll up the cable so that it has no kinks and place on
the Caddy.
s Store the pool cleaner in a protected area either
on its Caddy or simply upsidedown.
5.5. Off season storage
Cleaning the impeller
Unplug the power supply
Cable
To Next Page
Loading...
