Dolphin PROX 2 Gyro - Putting the Pool Cleaner into the Pool; Removing the Pool Cleaner from the Pool

Dolphin PROX 2 Gyro Pool Cleaner | Operating Instructions
5
EN
EN
Turn the power supply ON
ON
OFF
5.2. Putting the Pool Cleaner into the pool
5.3. Removing the Pool Cleaner from the pool
The robot will perform automatic shut-off at the end
of the cleaning cycle.
Turn Off and unplug the power supply
CAUTION
If Wonder brush/ Wonder rings are dry, soak
them in water until soft
Shake the robot from side to side or turn it
upside down to release trapped air.
Let it sink to the pool floor.