Dolphin S300i - Power Supply and Basic Operation; Power Supply Specifications; Basic Robot Operation

POWERSUPPLY
INPUT - 100-125 AC Volts/200-
230 AC Volts
50-60 Hertz
Output - <30 VDC
IP 54
Basic Operation:
1. Plug the Power supply into an electrical outlet.
2. Press the ON button
The LEDs will turn on and the robot will start to operate.
If no program is selected, the robot will perform a single cleaning cycle.
3. You can program the power supply at any time. See the relevant section
below for more details on each program.

1.  
2. 

  ON 
 LEDs 




 


3. 







