Dolphin Supreme M5 - Dolphin Operation; Preparing the Dolphin Pool Cleaner for Use; Adjusting the Handle Float Angle

2
English
3. Power supply unit
Digital, “Switch-Mode” power supply:
Input - 100-250 AC Volts•
50-60 Hertz•
180 Watt•
Output - 30 VDC•
IP 54•
Section 2 – Dolphin Operation
Part 1 – Preparing the Dolphin pool cleaner for use
A. Assemble the Caddy kit – you will find the instructions in a separate document
B. Adjusting the handle float angle
The Handle angle must be adjusted to determine the speed that the Dolphin advances along the water-line.
1. Press the latch down and hold in position.
2. Move the handle to the required position
and release the latch to lock the Handle in place.
Normal advance
More efficient cleaning action on water-line.
Fast advance
Fast speed – for faster but less efficient cleaning
action on water-line.
ON
On/Off
switch
Full Filter
Bag Indicator
Delay
Indicator
Reset button