To Next PageTo Next Page
Need help?Do you have a question about the Dometic 57915.741 and is the answer not in the manual?
General| Model | 57915.741 |
|---|---|
| Air Flow | 320 CFM |
| Type | Roof-mounted Air Conditioner |
| Power Source | 115V AC |
| Operating Mode | Cooling |
Section for logging essential unit details for future reference.
Lists the various Dometic air conditioner and heat pump models covered.
Highlights critical safety warnings regarding installation and operation.
Explains the meaning and importance of the safety alert symbol.
Defines signal words like WARNING and CAUTION for hazard levels.
Details design specifications and intended applications for the air conditioner.
Provides tips to enhance cooling performance and minimize RV heat gain.
Addresses condensation issues and preventative measures during operation.
Lists essential safety and operational precautions for installation.
Provides guidance on selecting the optimal roof location for the unit.
Details the process for preparing roof and ceiling openings for the unit.
Guidance on selecting the proper placement for the CCC and remote sensor.
Information on control cable type, termination, and routing.
Instructions for installing the freeze control sensor in the evaporator coil.
Steps for connecting the 115 VAC power supply to the unit.
Details on connecting low voltage wires for furnace, EMS, and other systems.
Procedure for mounting the CCC and connecting its control cable.
Steps for installing the ceiling template for specific return air covers.
Instructions for installing the foam divider for Genesis Air Filtration System.
Procedure for installing the divider plate onto the ceiling template.
Guidance for mounting the electronic control box on the ceiling template.
Final placement and insulation of the divider plate for air sealing.
Steps for installing the inside decorative cover for the Genesis system.
Securing the electronic control box to the ceiling template.
Installing the inside decorative cover and connecting wires.
Setting dip switches for proper system operation and features.
Instructions for performing a system reset after configuration changes.
Verifying all system features and functions operate correctly.
Schematic for the air conditioner's internal wiring connections.
Wiring diagrams specific to heat pump models.
