Dometic CDF2 - Safety Instructions

EN
CDF236 Safety instructions
13
I
2 Safety instructions
D
DANGER! Failure to obey these warnings will result in death or
serious injury.
Electrocution hazard
• Do not touch exposed cables with your bare hands.
• Before starting the device, ensure that the power supply line and the
plug are dry.
!
WARNING! Failure to obey these warnings could result in death
or serious injury.
Electrocution hazard
• Do not operate the cooling device if it is visibly damaged.
• If this cooling device's power cable is damaged, it must be replaced
to prevent safety hazards.
• This cooling device may only be repaired by qualified personnel.
Improper repairs can lead to considerable hazards.
• Plug the device to sockets that ensure proper connection especially
when the device needs to be earthed.
Fire hazard
• When positioning the device, ensure the supply cord is not trapped or
damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
• Keep the ventilation openings on the device housing or in installations
free of obstructions.
• Do not use any mechanical objects or other means to speed up the
defrosting process, unless they have been recommended by the man-
ufacturer for this purpose.
• Do not damage the refrigerant circuit.
NOTE
Supplementary information for operating the product.
DometicCDF2-36_OPM_4445102509_EMEA17_202x-xx-xx.book Page 13 Thursday, September 15, 2022 2:57 PM