Operation CDF236
18
6Operation
6.1 Before initial use
I
6.2 Saving energy
• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• If the cooler has a basket: For optimal energy consumption, position the basket
according to its position on delivery.
• On a regular basis, make sure the lid seal still fits properly.
6.3 Opening or removing the lid
➤ Proceed as shown (fig. 4, page 4).
5 SET Selects the input mode
– Temperature setting
– Celsius or Fahrenheit display
– Set battery monitor
– Set brightness of display
6 DOWN – Press once to decrease the value
7 UP + Press once to increase the value
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter “Cleaning and maintenance” on page 22).
Item Description Explanation
DometicCDF2-36_OPM_4445102509_EMEA17_202x-xx-xx.book Page 18 Thursday, September 15, 2022 2:57 PM
To Next Page
Loading...
