Operation CFF12, CFF20, CFF35, CFF45, CFF70DZ
24
I
Latching the cooler lid
1. Close the lid.
2. Press the latch (fig. 2, page 4) down, until it latches in place audibly.
I
6.6 Fixing the cooler while transporting (CFF12)
When transporting the cooler in a vehicle, you can fix the device with the safety seat
belt or with luggage tighteners so that it remains in its position.
!
Fixing with a safety seat belt
➤ Proceed as shown (fig. b, page 10).
Fixing with luggage tighteners
➤ Proceed as shown (fig. c, page 10).
6.7 Setting the temperature
CFF12, CFF20, CFF35, CFF45
1. Press the “SET” button (fig. 3 5, page 5) once.
2. Use the “UP +” (fig. 3 7, page 5) and “DOWN –” (fig. 3 6, page 5) buttons to
select the cooling temperature.
NOTE
When operating from a battery, the display switches off automatically if
the battery voltage is low. The LED “P” flashes orange.
NOTE
CFF35, CFF45: When latching the lid, ensure that both latch side pins
are fully engaged to ensure a good lid seal. One latch may engage
slightly before the other.
If the lid is not closed equally at both sides, press until a second click is
heard.
WARNING!
Make sure that the cooler is fixed correctly. Otherwise it could be dis-
lodged and cause severe injuries to passengers when a hard break
occurs.
To Next Page
Loading...
