Dometic CFF20 - Operation; Initial Setup and Handle Mounting

EN
CFF20, CFF35, CFF45, CFF70DZ Operation
13
6Operation
6.1 Before initial use
I
Mounting the handles
The handles are enclosed unassembled. If you wish to attach the handles, proceed
as follows:
➤ Assemble a handle by putting two holders (1) and a handle (2) together.
➤ Fasten the holders with the enclosed screws in the holes provided.
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter “Cleaning and maintenance” on page 28).
CFF20 CFF70DZCFF35, CFF45
2x
1
2
1
5
DometicCFF20-35-45-75DZ_OPM_4445103133_APAC(en)_202x-xx-xx.book Seite 13 Dienstag, 20. Oktober 2020 4:16 16