15
• Check that the voltage specifica-
tion on the type plate corresponds
to that of the energy supply.
• The insulation of the cooling
device contains flammable cyclo-
pentane and requires special dis-
posal procedures. Deliver the
cooling device at the end of its life-
cycle to an appropriate recycling
center.
• Do not use electrical devices
inside the cooling device unless
they are recommended by the
manufacturer for the purpose.
• Hazard from excessively low
temperature
Ensure that only those objects are
placed in the cooling device that
are intended to be cooled at the
selected temperature.
• The cooling device shall not be
exposed to rain.
Intended use
The device is suitable for:
• Operation in vehicles
• Cooling and deep-freezing food
•Camping use
The device is not suitable for:
• Storage of corrosive, caustic or solvent-contain-
ing substances
• Quick-freezing of food
Operation
Scope of delivery: fig. 1
Proceed as shown:
• Connecting to a battery: fig. 2
• Connecting to an AC power supply: fig. 3
or a DC power supply: fig. 4
but not both: fig. 5
• Switching on the cooler: fig. 6
• Switching off and storing the cooler: fig. 7
• Display overview: fig. 8
• Locking/unlocking the display: fig. 9
• Selecting the temperature units: fig. 0
• Setting the temperature: fig. a
• Using the battery monitor: fig. b
• Setting the display‘s brightness: fig. c
• Switching on or off the compartments: fig. d
• Switching on or off the icemaker: fig. e
• Setting the Bluetooth signal: fig. f
• Setting the WiFi signal: fig. g
• Resetting to factory settings: fig. h
• Using USB port for power supply: fig. i
__temp_AMER.book Seite 15 Freitag, 25. September 2020 9:12 21
To Next Page
Loading...
Need help?
General
