Operation CK40D
10
➤ Place the cooler on a firm foundation.
➤ Use the cable to connect the cooler to a 220–240 Vw socket.
➤ Switch the cooler on by pressing the “ON/OFF” button (fig. 2 2, page 3).
✓ The display switches on and shows the current cooling temperature in °C.
✓ The cooler starts cooling the interior.
➤ To switch the cooler off, press the “ON/OFF” button (fig. 2 2, page 3).
➤ The display switches off.
6.3 Setting the temperature
The cooling capacity can be influenced by:
• The ambient temperature
• The number of wine bottles to be cooled
• The frequency with which the door is opened
➤ Press the “TEMP –” (fig. 2 3, page 3) button to decrease the desired cooling
temperature by 1 °C.
➤ Press the “TEMP +” (fig. 2 4, page 3) button to increase the desired cooling
temperature by 1 °C.
✓ The cooling temperature set in °C then appears in the display for a few seconds.
✓ The display flashes to confirm that the selected temperature has been set.
CK40D-O-16s.book Seite 10 Freitag, 17. Februar 2017 6:04 18
To Next Page
Loading...
